No Chest Rise - SimMan3G

Owned by mleisin@arizona.edu
Last updated: May 16, 2023
1 min read
  • Check that manikin is switched ON.
  • Check that Manikin is not in paused/sleep mode due to inactivity.
  • Check that awRR is not set to zero on the Instructor Application
  • If the Simulator has been running too long, the internal compressor will be overheated. Wait for approximately 20
  • Check air tubing for leakage; check that all connections are intact. Usually, after back-to-back compression simulations internal tubing can be dislodged.