...
2. Fill a syringe half-full and connect it to the tube.
3. Hold the tube up upright for at least 60 seconds and tap it to move any air bubbles upwards.
4. Aspirate the air before before filling for optimal imaging.
5. Inject 10 ml of fluid.6. Remove 5 ml of fluid along with any air.SLOWLY infuse the refill solution into the arterial tube in 5ml increments
6 Purge air after each successive 5ml by pulling back on the plunger
7. Repeat steps 3 through 6 until all the air is removed and the vessels are filled.
...
Method B: IV Bag/Quick-Fill port for high-volume use
1. Connect an IV bag containing CAE Blue Phantom fluid to the fill tube.
2. Hang the IV bag no more than 12 inches (30 cm) above the training model to avoid overfilling.
3. As users withdraw fluid, it is refilled continuously from the IV bag
...